en

WIRENBOARD PRO

View as:
GroupsList
WIRENBOARD PRO

WIRENBOARD PRO — is a special line of equipment from Wiren Board for professional installations.

The main differences from the standard line:

  • Only the most powerful and productive complete sets of devices.
  • 5 year warranty with priority technical support.
  • Delivery only through certified integrators is the key to a competent approach to solving the task.
  • Maintenance of the installation — the integrator will accompany the operation of the installation during the warranty period. If something happens to the integrator, we will provide a warranty for the devices and help transfer the installation to another partner for maintenance.

If you are an end client and want to use WIRENBOARD PRO equipment for your tasks, contact us and we will suggest the partner closest to you.

If you are an integrator and want to work with WIRENBOARD PRO equipment, please read the terms of certification.
WBPRO-PLC8-4G-64GWBPRO-PLC8-4G-64G
WBPRO-PLC8-4G-64G
Automation controller WBPRO-PLC8-4G-64G

WBPRO-PLC8-4G-64G — are used in the tasks of monitoring server and climate equipment, dispatching and collecting data from metering devices, as the basis for "smart home" and industrial automation.

Main differences from WBPRO-PLC7-2G-64G: 64-bit ARM processor 1.5 GHz 28 nm, up to 4 GB of RAM, CAN is now an expansion module.

In stock 12 pcs.
€1,266.12
WBPRO-WALLSENS-ZBWBPRO-WALLSENS-ZB
WBPRO-WALLSENS-ZB
Wall sensor 8 in 1 with Zigbee WBPRO-WALLSENS-ZB
The device is still being tested. Standard technical support is not provided. Only for those who know what it is and how to work with it.

Hybrid digital sensor of temperature, humidity, illumination, noise, CO2 and VOC level. It is equipped with the IR blaster (and the receiver for learning). Designed for climate control in residential and office premises.
On order up to 20 business days.
€461.61
WBPRO-WALLSENS2WBPRO-WALLSENS2
WBPRO-WALLSENS2
Wall sensor 8 in 1 WBPRO-WALLSENS2
Combined digital sensor for temperature, humidity, light, motion, noise, CO2 and volatile organic compounds. Equipped with an IR transmitter (and receiver for training). Designed for climate control in residential and office premises.
In stock 17 pcs.
from  €388.34
WBPRO-PMOD-DI14WBPRO-PMOD-DI14
WBPRO-PMOD-DI14
Input-output extension module WBPRO-PMOD-DI14
Consists of 14 universal inputs("dry contact" type/ low voltage presence with group galvanic isolation). The operating mode depends on the selected connection scheme. The module can operate in both modes simultaneously.
In stock 30 pcs.
€105.51
WBPRO-PMOD-RO16WBPRO-PMOD-RO16
WBPRO-PMOD-RO16
Input-output extension module WBPRO-PMOD-RO16
Designed for managing contactors, signal lamps and other low power loads
In stock 2 pcs. , 3 pcs. more in reserve
€212.49
WBPRO-UPSWBPRO-UPS
WBPRO-UPS
UPS with built-in batteries WBPRO-UPS
Uninterruptible power supply module on lithium-polymer batteries. Supports an output voltage of 12 or 24V when there is no input power. The rechargeable batteries are built into the body of the device. Suitable for equipment from other manufacturers.
In stock 18 pcs.
€187.57
WBPRO-LEDREL3WBPRO-LEDREL3
WBPRO-LEDREL3
Relay module for LED lighting (3 channels) WBPRO-LEDREL3
Relay module with high in-rush current capacity for lighting management and switching general purpose loads.
In stock 7 pcs.
€126.03
WBPRO-LEDREL6WBPRO-LEDREL6
WBPRO-LEDREL6
Relay module for LED lighting WBPRO-LEDREL6
Relay module with high in-rush current capacity for lighting management and switching general purpose loads. Designed for industrial and home automation systems.
The module is designed to control loads up to 10A rated (16 A peak current) without contactors. It is equipped with a special input for simultaneous cutoff of all loads.
In stock 10 pcs.
€187.57
WBPRO-METER3WBPRO-METER3
WBPRO-METER3
Multi-channel electricity meter (3 lines) WBPRO-METER3
The WBPRO-METER3 energy meter is an ideal choice for industrial metering installations in apartment houses and office buildings as well as for monitoring consumers in data centers and smart offices. Designed for operation in single phase or three phase AC networks.
External split-core current transformers allow for installation on live circuits with zero downtime.
The WBPRO-METER3 can measure inrush currents of various equipment, such as lighting features or motors. It can detect and measure voltage surges as well.
In stock 4 pcs. , 2 pcs. more in reserve
€175.85
WBPRO-METER3TWBPRO-METER3T
WBPRO-METER3T
Multi-channel electricity meter (3 lines) WBPRO-METER3T
Electricity meter WBPRO-METER3T is designed for energy management and power quality monitoring. The WBPRO-METER3T can be used in apartment buildings, data centers and smart offices. Designed for operation in single- or three-phase AC networks.
The load is connected by passing a wire through a solid-core transformer. This meter is well suited for operation in conjunction with current transformers with a secondary current of 5A.
The WBPRO-METER3T can also detect voltage surges and measure inrush currents of loads such as lighting or motors.
In stock 12 pcs.
€212.49
WBPRO-METREL2WBPRO-METREL2
WBPRO-METREL2
Relay module for socket groups with power measurement WBPRO-METREL2
Designed for commuting and monitoring of powerful power load of general purpose, including inductive: control of groups of sockets, motors, heaters, etc. Rated load up to 20A (4.5 kW) per channel, can be used directly without intermediate contactors for switching socket groups and other loads protected by a 16A circuit breaker. The device works only when 12-28V voltage is applied to the V+ and GND terminals.
In stock 8 pcs. , 2 pcs. more in reserve
€164.13
WBPRO-CUREL6WBPRO-CUREL6
WBPRO-CUREL6
Compact universal relay module WBPRO-CUREL6
Designed for direct control of LED, fluorescent and incandescent lighting and other loads rated up to 10 A (2 kW).
Thanks to the special relay design, each channel can withstand a continuous current of up to 16 A and inrush currents of up to 80 A. Please note that due to the terminal block design, the total rated switching current per group of three channels is 20 A.
Can be used as a general-purpose output module.
Takes only two modules on a DIN rail.
In stock 11 pcs.
€126.03
WBPRO-UREL6WBPRO-UREL6
WBPRO-UREL6
Universal Relay Module WBPRO-UREL6
The module has a built-in power supply that allows you to:
Save space and simplify installation in small installations without a controller: no external power supply or wiring for it is needed. At the same time, you get local control from buttons and a foundation for future automation.
Keep the relays working if the low-voltage RS-485 bus is disconnected or damaged — the module automatically switches to the internal power supply and continues to operate in the mode set during configuration.
Emulate relays with normally closed contacts, but for a much higher current than such relays traditionally switch.
Works with the Fast Modbus protocol extension — provides scanning, convenient configuration and instant polling of the device status.
In stock 0 pcs. , 20 pcs. more in reserve
€162.66
WBPRO-CLEDREL6WBPRO-CLEDREL6
WBPRO-CLEDREL6
Compact relay module for LED lighting WBPRO-CLEDREL6
Compact relay module with high in-rush current capacity for lighting management and switching general purpose loads.
In stock 33 pcs.
€164.13
WBPRO-REL3-IWBPRO-REL3-I
WBPRO-REL3-I
Relay module 3-channel WBPRO-REL3-I
Relay module with high in-rush current capacity for lighting management and switching general purpose loads.
In stock 14 pcs.
€123.09
WBPRO-POWREL3WBPRO-POWREL3
WBPRO-POWREL3
Relay module for socket groups WBPRO-POWREL3
Designed for switching general purpose high-power loads, including induction loads: control groups of outlets, motors, heaters, etc. Rated load up to 20A (4.5 kW) per channel.
In stock 16 pcs.
€142.15
WBPRO-METER12WBPRO-METER12
WBPRO-METER12
Multi-channel energy meter (12 lines) WBPRO-METER12
The WBPRO-METER12 meter is designed for technical energy metering in apartment buildings and office buildings, and for monitoring consumers in data centers and smart offices. Designed for operation in single-phase or three-phase AC networks. External split-core current transformers allow the system to be installed without disconnecting consumers.
In stock 17 pcs.
€461.61
WBPRO-METER6WBPRO-METER6
WBPRO-METER6
Multi-channel electricity meter (6 lines) WBPRO-METER6
The WBPRO-METER6 energy meter is perfect for consumption analysis in apartments and private homes. It is designed for operation in single phase AC networks.
In stock 12 pcs.
€136.28
WBPRO-AMPWBPRO-AMP
WBPRO-AMP
LED Amplifier CV WBPRO-AMP
4-channel amplifier for dimming LED strips. Up to 10 A per channel. Can be used in conjunction with
WBPRO-LEDDIMdimmer or other LED strip controllers.
In stock 17 pcs.
€93.79
WBPRO-10VDIMWBPRO-10VDIM
WBPRO-10VDIM
Output module 0-10V WBPRO-10VDIM
The 4-channel lighting control module is designed to control lighting fixtures equipped with 0-10V interfaces, PWM, as well as to manage arbitrary loads equipped with compatible inputs.
Available upon request.
In stock 16 pcs.
€136.28
WBPRO-DALIWBPRO-DALI
WBPRO-DALI
DALI Gateway 3-channel WBPRO-DALI
A 3-channel RS-485 gateway for controlling DALI-2 (IEC 62386) devices with Wiren Board controllers. It lets you integrate modern lighting systems (LED drivers, sensors, switches, ballasts) into industrial automation and smart home projects.
In stock 6 pcs. , 2 pcs. more in reserve
€338.51
WBPRO-FETDIMWBPRO-FETDIM
WBPRO-FETDIM
MOSFET dimmer 230V WBPRO-FETDIM
Designed for dimming incandescent lamps, this dimmer also supports dimming LED bulbs, LED strips’ drivers, electronic power transformers driving halogen lights, etc.
Supports leading-edge and trailing-edge dimming.
Can be used to control the speed of a fan.
In stock 21 pcs.
€219.81
WBPRO-DTHERM v.3WBPRO-DTHERM v.3
WBPRO-DTHERM v.3
Plug-in module for digital thermometers WBPRO-DTHERM v.3
Compact module with an RS-485 interface and universal inputs for connecting 1-Wire sensors and discrete signals. Size 34×20×17 mm.
Allows connecting up to 40 DS18B20 temperature sensors (20 per input).
Used to poll 1-Wire sensors in conditions of strong interference and at a great distance from the controller, as well as to poll buttons, reed switches and energy meters with a pulse output.
The main difference from the previous version is the compact size, which allows the device to be installed in wall boxes.
In stock 3 pcs. , 6 pcs. more in reserve
€50.70
WBPRO-WATERWBPRO-WATER
WBPRO-WATER
Leak protection block WBPRO-WATER
Everything you need for a typical task of monitoring the “wet zone” of an apartment, house or industrial facility:
water leak detection,
automatic control of shut-off valves,
counting pulses from water meters even in the absence of electricity.
Up to 6 monitoring zones, “dry contact” outputs, “wet cleaning” mode and easy integration into an automation system.
The main differences from the previous version: by default, five inputs are configured for connecting sensors, input activation indicators, two buttons on the front panel, support for Larnitech sensors and the “wet cleaning” mode.
In stock 0 pcs. , 23 pcs. more in reserve
€212.49
WBPRO-ETHGW3WBPRO-ETHGW3
WBPRO-ETHGW3
RS-485, Ethernet, Wi-Fi, WBIO interfaces WBPRO-ETHGW3
The WBPRO-ETHGW3 gateway is designed to connect devices with RS‑485 and WBIO (I/O modules) interfaces over Ethernet and Wi‑Fi.
It provides two independent RS‑485—TCP channels; each can operate in one of the following modes:
Modbus TCP — for working with RS‑485 Modbus RTU devices.
Raw TCP Bridge — for any serial RS‑485 protocol (e.g., Modbus RTU, DOOYA, AKKO, etc.).
WBIO modules connect via the side I/O Bus connector and are exposed as a Modbus device on the RS485‑2 bus with an address printed on the module label. WBIO support can be disabled in the web interface to free the port for any protocols.
In stock 17 pcs.
€285.76
WBPRO-PMOD-232WBPRO-PMOD-232
WBPRO-PMOD-232
Extension module WBPRO-PMOD-232
Installed in the extension module connector in the controller enclosure.
In stock 496 pcs.
€30.19
WBPRO-PMOD-GNSSWBPRO-PMOD-GNSS
WBPRO-PMOD-GNSS
Satellite navigation module WBPRO-PMOD-GNSS
Determination of coordinates. Standard time signal. Installed in the extension module connector in the controller enclosure.
In stock 10 pcs.
€82.06
WBPRO-4GWBPRO-4G
WBPRO-4G
Extension module WBPRO-4G
4G (LTE) modem. Installed in the WBPRO-PLC7-2G-64G controller. The set includes an angular antenna with an SMA connector.
In stock 8 pcs. , 1 pcs. more in reserve
€142.15
WBPRO-ANALOG6WBPRO-ANALOG6
WBPRO-ANALOG6
Module for connecting industrial signals WBPRO-ANALOG6
Supports all common types of temperature sensors, thermocouples, 4-20mA signals, and other standard analog signals.
6 channels, each of which can be connected to one or two sensors, depending on the type that is selected in the settings. Two 5V DC outputs to power sensors.
The module is built on a precision low-noise 16-bit ADC with an error of 0.1%, operation in the industrial temperature range, and with an input signal amplification of 128 times without loss of accuracy.
In stock 11 pcs.
€180.25
WBPRO-PMDO-R3A-1WBPRO-PMDO-R3A-1
WBPRO-PMDO-R3A-1
Extension module WBPRO-PMDO-R3A-1

One relay output with NO contacts for WBPRO-PLC7-2G-64G.

Maximum current for resistive load: 3A for 230VAC or 30VDC. Suitable for driving low-power loads without inrush currents.

In stock 20 pcs.
€24.62
WBPRO-PMOD-485WBPRO-PMOD-485
WBPRO-PMOD-485
Optional RS-485 interface WBPRO-PMOD-485
Auxiliary galvanic isolated RS-485 port. Installed in the extension module connector in the controller enclosure.
In stock 41 pcs.
€50.70
WBPRO-DI8WBPRO-DI8
WBPRO-DI8
8-channel counter input module WBPRO-DI8

Pulse counter module for connecting water, electricity, gas, and other types of meters with pulsed outputs of dry contact or open collector type.

When using momentary switches, the module can recognize up to four types of pressing and transmit events to the controller via Modbus.

In stock 33 pcs.
€96.72
WBPRO-PMOD-KNXWBPRO-PMOD-KNX
WBPRO-PMOD-KNX
KNX TP interface WBPRO-PMOD-KNX
Installed in the extension module connector in the controller enclosure.
In stock 30 pcs.
€212.49
WBPRO-PMOD-ZBWBPRO-PMOD-ZB
WBPRO-PMOD-ZB
Zigbee module WBPRO-PMOD-ZB
Adds a Zigbee interface. It is installed in the connector on the controller board.
Wi-Fi antenna is included, connection is made through the SMA male connector.
Zigbee is a wireless communication standard as Wi-Fi and Bluetooth, created specifically for the Internet of things: from home automation (control of light, household appliances, audio-video equipment) to the construction of monitoring systems for large industrial facilities (temperature control and vibration of devices, collection of readings of electricity, water and gas consumption sensors, survey of fire and security sensors, etc.). Zigbee is used by all large companies in the smart home market.
In stock 4 pcs. , 1 pcs. more in reserve
€84.99
WBPRO-PMOD-EBUSWBPRO-PMOD-EBUS
WBPRO-PMOD-EBUS
Extension module WBPRO-PMOD-EBUS
A module for controlling electric and gas boilers via the eBus protocol.
It is installed in a slot on the controller board and emulates an external thermostat.
With the module you can:
set one of four boiler operating modes;
get sensor data, boiler status and error code;
change temperature setpoints;
use the boiler in home automation scenarios.
Boilers from Vaillant and Protherm can be controlled over the eBus bus. We do not guarantee operation with boilers from other manufacturers due to their limited support of the eBus protocol.
In stock 19 pcs.
€149.47
WBPRO-PMOD-OTWBPRO-PMOD-OT
WBPRO-PMOD-OT
Extension module WBPRO-PMOD-OT
OpenTherm coupler WBE2-I-OPENTHERM is designed to work as an extension module for the WBPRO-PLC, and is used for remote control of gas and electric boilers with OpenTherm interface.
In stock 19 pcs.
€149.47
WBPRO-REL6-IWBPRO-REL6-I
WBPRO-REL6-I
Relay module 6-channel WBPRO-REL6-I
Relay module with high in-rush current capacity for lighting management and switching general purpose loads. Designed for industrial and home automation systems.
The module is designed to control loads up to 10A rated (16 A peak current) without contactors. It is equipped with a special input for simultaneous cutoff of all loads.
In stock 4 pcs. , 1 pcs. more in reserve
€175.85
WBPRO-PMOD-BATWBPRO-PMOD-BAT
WBPRO-PMOD-BAT
Battery module for WBPRO-PLC​ WBPRO-PMOD-BAT
Built-in uninterruptible power supply for WBPRO-PLC for
WBPRO-PLC
. The module powers the controller itself, the expansion and modules, and external devices connected via the 5Vout, Vout and USB terminals.
The WBPRO-PMOD-BAT is installed in the slot for backup power modules in the controller housing.
The module has a power limit
and is designed for small installations.
In stock 0 pcs. , 2 pcs. more in reserve
€93.79
WBPRO-PMOD-ELDCWBPRO-PMOD-ELDC
WBPRO-PMOD-ELDC
Supercapacitor back-up module WBPRO-PLC​ WBPRO-PMOD-ELDC
Built-in supercapacitor-based uninterruptible power supply for
WBPRO-PLC
. The module powers the controller itself, expansion and I / O modules, and external devices connected via the 5Vout, Vout and USB terminals.
The WBPRO-PMOD-ELDC is installed in the controller case in the slot for the redundant power modules.
The module is limited in power
and operating time (2-3 minutes).
In stock 14 pcs.
€93.79
WBPRO-PMOD-RO4WBPRO-PMOD-RO4
WBPRO-PMOD-RO4
Input-output extension module WBPRO-PMOD-RO4
Special configuration of outputs designed for controlling motorized curtains, roller blinds, shut-off valves
In stock 13 pcs.
€123.09
WBPRO-MINRELWBPRO-MINREL
WBPRO-MINREL
Plug-in mini relay module WBPRO-MINREL
Compact relay module. Installable in a junction box.
In stock 18 pcs.
€79.13
WBPRO-IRWBPRO-IR
WBPRO-IR
Embedded IR control module WBPRO-IR
A learning module with an infrared transmitter. Controls air conditioners, fan coils, TV sets, etc. The module is controlled by a controller or PC over the RS-485 bus with Modbus RTU protocol commands.
In stock 12 pcs.
€86.46
WBPRO-MINANALOGWBPRO-MINANALOG
WBPRO-MINANALOG
Integrated module for industrial sensors WBPRO-MINANALOG
The module transmits data of two 0-20 mA signals via Modbus RTU.
For installation in a junction box.
Dimensions 57 х 18 х 14 mm
In stock 20 pcs.
€58.62
WBPRO-PMOD-SO8WBPRO-PMOD-SO8
WBPRO-PMOD-SO8
Input-output extension module WBPRO-PMOD-SO8
Designed for managing low voltage loads, devices with dry contact inputs. The devices do not require common ground with the controller.
In stock 10 pcs.
€84.99
WBPRO-PMOD-HDI8WBPRO-PMOD-HDI8
WBPRO-PMOD-HDI8
Input-output extension module WBPRO-PMOD-HDI8

The module is designed to monitor the state of circuit breakers, interrogate signal lamps, etc.

In stock 8 pcs.
€92.32
WBPRO-LEDDIMWBPRO-LEDDIM
WBPRO-LEDDIM
RS-485, Modbus RTU 4-channel dimmer WBPRO-LEDDIM
4-channel dimmer to control LED strips: colored (RGB, RGB+W), yellow-white (CCT) or white (W). Types of connected strips, PWM frequency and the function of inputs can be changed in device settings.
The dimmer can be configured in web interface of a Wiren Board controller, by third-party controllers or by PC with RS-485 adapter.
The dimmer can work stand-alone or paired with a controller. If you need more power, you can combine dimmer channels or use WBPRO-AMP amplifier.
In stock 7 pcs. , 12 pcs. more in reserve
€115.77
WBPRO-PMOD-RO8WBPRO-PMOD-RO8
WBPRO-PMOD-RO8
Input-output extension module WBPRO-PMOD-RO8
Designed for managing lighting, motors, contactors
In stock 13 pcs.
€123.09
Any questions? Please contact us.

Legal purchase terms

  • These terms of sale are developed based on the Civil Code of the Republic of Kazakhstan, the Law of the Republic of Kazakhstan "On Consumer Protection," and other regulatory acts. These rules regulate the procedure for retail purchase and sale of goods through the online store, being a public offer addressed to individuals and legal entities ("Buyers").
  • The Buyer accepts the terms and conditions set out in these terms and conditions by placing an Order on the online store's website. An order is considered properly executed if the Buyer provides the Seller with the following information:
    • Buyer's last name and first name
    • Phone number
    • Delivery address
    • Product name
    • Quantity
  • The Buyer grants the Seller the right to use all personal data transmitted in the Order for the following purposes:
    • Fulfilling obligations to the Buyer
    • Forming and developing a loyalty program
    • Informing Buyers about news from the online store
  • Delivery is carried out through third-party services and is available on weekdays from 9:00 to 18:00. Delivery times depend on the region and range from 1 to 14 business days. Delivery terms include the following:
    • Delivery is without demonstration of the product
    • If the Buyer disagrees with the delivery terms, they may cancel the order at any time before receiving it
    • Delivery costs are charged in case of refusal of the product
    • The Buyer must check the product packaging for damages upon receipt
  • Payment for ordered Products can be made:
    • By bank transfer based on the invoice issued to the Buyer
    • By credit card via a payment link generated for the Buyer
  • Orders are processed on working days from 10:00 to 18:00 Astana time. Orders placed after 18:00 will be processed the next business day.
  • Products of good quality can be returned within 14 days of receipt, provided they have not been used. For returns:
    • The Buyer must email a return request to the Seller's support
    • The refund excludes delivery costs
    • Refunds are processed within 10 days of claim submission
  • The warranty period for the Product is 24 months from the date of shipment.
  • The risk of accidental loss or damage passes to the Buyer at the time of transfer, as confirmed by the Buyer's signature on the delivery documents. Ownership passes upon full payment.
  • The legislation of the Republic of Kazakhstan applies to relations between the Buyer and the Seller.
  • The Seller reserves the right to amend these terms. Changes will be posted on the website at least 7 days before their effective date.
  • The Buyer guarantees they understand and accept all terms unconditionally and in full.
  • All disputes will be resolved through negotiations. If no agreement is reached, disputes will be referred to the arbitration court of Astana.